Toyota Tundra 2005 Service - Repair - Maintenance page 2491

SUSPENSION AND AXLE
(c) Replace the No. 2 spring bumper.
(1)
(2)
SST
HINT:
At the time of installation, use a torque wrench with a fulcrum
length of 345 mm (13.58 in.).
Torque: 23 N·m (235 kgf·cm, 17 ft·lbf)
(3)
(d) Install the front wheel.
Torque: 110 N·m (1,150 kgf·cm, 83 ft·lbf)
− FRONT LOWER SUSPENSION ARM
Remove the stabilizer bar (See page SA−89).
Using SST, replace the No. 2 spring bumper.
09922−10010
Install the stabilizer bar (See page SA−91).
SA−77