SA−68
INSTALLATION
1.
INSTALL SHOCK ABSORBER WITH COIL SPRING
(a)
Install the upper side of the shock absorber to the chassis frame with the 3 nuts.
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
(b)
Connect the lower side of the shock absorber to the lower suspension arm with the bolt, washer and
nut.
Torque: 135 N·m (1,400 kgf·cm, 100 ft·lbf)
2.
INSTALL FRONT WHEEL
Torque: 110 N·m (1,150 kgf·cm, 83 ft·lbf)
SUSPENSION AND AXLE
−
FRONT SHOCK ABSORBER
SA0A6−04