Toyota Tundra 2005 Service - Repair - Maintenance page 2733

Side Plate
Front
Housing
Inscribed
Mark
Round End
Outward
Snap Ring
STEERING
(c)
NOTICE:
Make sure that the side plate is installed in the correct
direction.
Front
Housing
F19953
4.
Align the dent of the cam ring with the dent of the side plate, and
install the cam ring with the inscribed mark facing outward.
NOTICE:
Cam Ring Make sure that the cam ring is installed in the correct direc-
tion.
F19954
5.
(a)
HINT:
Vane pump rotor has no specific direction.
F19955
(b)
(c)
Inward
F19956
(d)
F19811
- POWER STEERING VANE PUMP (1GR-FE)
Align the dent of the side plate with the dent of the front
housing, and install the side plate.
INSTALL CAM RING
INSTALL VANE PUMP ROTOR
Install the vane pump rotor.
Coat 10 vane plates with power steering fluid.
Install the 10 vane plates with the round end facing out-
ward.
Using a screwdriver and a snap ring expander, install a
new snap ring to the vane pump shaft.
Author :
SR-55
Date :
4381