BO-214
BODY
-
REAR SEAT (LH)
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
z
Tape the screwdriver tip before using it to remove the
parts.
z
A bolt without a torque specification is shown in the stan-
dard bolt chart (see page
1.
REMOVE HEADREST
Remove the 2 headrests.
2.
REMOVE RECLINING ADJUSTER RELEASE HANDLE
Remove the screw and release handle.
3.
REMOVE NO. 1 RECLINING COVER LH
(a)
Unzip the seat cushion cover.
(b)
Remove the screw and No. 1 rear seat reclining cover.
H23549
4.
REMOVE NO. 1 RECLINING COVER RH
(a)
Unzip the seat cushion cover.
(b)
Remove the screw and No. 1 rear seat reclining cover.
H23467
5.
REMOVE SEAT CUSHION UNDER COVER (LH AND
RH)
(a)
Remove the 2 screws and 2 seat cushion under covers.
H05304
SS-2
).
Author :
Date :
BO4R5-03
4985