Toyota Tundra 2005 Service - Repair - Maintenance page 3190

BO-76
a
a
a
a
b
b
a - a b - b
A
Primer M
Primer M
Adhesive
5.
Install a new dam with double-stick tape as shown in the il-
lustration.
NOTICE:
Do not touch the glass surface after cleaning it.
Along Datum
Line
H11172
6.
(a)
(b)
(c)
(d)
BO2820
7.
Using a cleaner, clean the contact surface which is black-col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
BO4421
8.
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
z
z
z
H02865
BODY - WINDSHIELD
INSTALL NEW DAM
A: 7.0 mm (0.276 in.)
POSITION GLASS
Place the glass in the correct position.
Check that all contacting parts of the glass rim are perfect-
ly even.
Place reference marks between the glass and body.
Remove the glass.
CLEAN CONTACT SURFACE OF GLASS
COAT CONTACT SURFACE OF BODY WITH PRIMER
"M"
Let the primer coating dry for 3 minutes or more.
Do not coat Primer M to the adhesive.
Do not keep any of the opened Primer M for later use.
Author : Date :
4847