Toyota Tundra 2005 Service - Repair - Maintenance page 3074

BE-174
Continued from previous page
9. Press LOCK and UNLOCK switches on transmitter simultaneously for 1.0 to 1.5
seconds.
Add, Rewrite or
Synchronization Mode
Within
40 sec.
10: Press LOCK switch for
more than 1.0 second.
Response for registration completion:
TVIP ECU automatically performs power door LOCK-UNLOCK operation to inform
which mode has been selected. In response to LOCK-UNLOCK operation, taillights blink
and TVIP buzzer chirps.
LOCK-UNLOCK Occurs Once
Within
2 sec.
Registration of recognition code has
been completed.
LOCK
UNLOCK
Open driver's door.
Registration of recognition codes (add, rewrite, setting or synchronization mode) is
completed.
BODY ELECTRICAL
w/o Double switch
operation
Press UNLOCK switch
10:
for more than 1.0 second.
T1
Proceed with flow chart to finish
registration.
- WIRELESS DOOR LOCK CONTROL SYSTEM (Except
Double Cab)
Setting Mode
10:
LOCK-UNLOCK Occurs Twice
Registration of recognition code has failed.
HINT:
If TVIP ECU receives recognition code that has
not been registered in synchronization mode,
registration of recognition code will fail.
T1
LOCK
UNLOCK
If another transmitter is to be registered.
HINT:
4 types of recognition codes can be
registered at one time.
Author :
w/ Double switch
operation
Press LOCK switch for
more than 1.0 second.
T1
T1: Approx. 1 sec.
Within 40 sec.
Date :
4731