Toyota Tundra 2005 Service - Repair - Maintenance page 3180

BO-66
Only one
Front
Others
Only one
Front
Others
BODY - DECK TOP PROTECTOR
REMOVAL
1. Access cab (Standard body type):
REMOVE REAR BODY SIDE PANEL PROTECTOR
Using a moulding remover, remove the 2 protectors.
NOTICE:
z
Each protector has 21 clips as shown in the illustra-
tion.
z
Be careful not to damage the clips.
B17176
2. Access cab (Wide body type):
REMOVE REAR BODY SIDE PANEL PROTECTOR
Using a moulding remover, remove the 2 protectors.
NOTICE:
z
Each protector has 19 clips as shown in the illustra-
tion.
z
Be careful not to damage the clips.
3. Access cab (Standard body type), Standard cab:
REMOVE TAIL GATE PROTECTOR
(a) Remove the 6 pins.
(b) Using a clip remover, remove the protector and 10 clips.
4. Access cab (Wide body type) only:
REMOVE TAIL GATE PROTECTOR
(a) Using a torx® socket wrench (T30), remove the 4 screws.
(b) Using a moulding remover, remove the protector and 8
clips.
B17177
Author : Date :
BO4Q1-02
4837