Toyota Tundra 2005 Service - Repair - Maintenance page 2829

RS-62
SUPPLEMENTAL RESTRAINT SYSTEM - SIDE AIRBAG ASSEMBLY (Power Adjuster Type)
(g) Install the screw to the seat cushion outer shield.
7. INSTALL SLIDE KNOB AND RECLINING KNOB
8. INSTALL HEADREST
9. INSTALL FRONT SEAT
Mount the front seat to the vehicle.
NOTICE:
Be careful not to damage the body.
(a) Connect the connectors.
(b) Slide the front seat to the rearmost position.
H24312
(c) Temporarily tighten the bolts on the front side, starting
from the bolt on the inner side, and fully tighten them.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
(d) Slide the front seat to the most front position.
(e) Temporarily tighten the bolts on the rear side, starting
from the bolt on the inner side, and fully tighten them.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
10. INSTALL SEAT TRACK COVERS
11. CONNECT CABLE TO NEGATIVE BATTERY TERMI-
NAL
12. INSPECT SRS WARNING LIGHT (SEE PAGE
Author : Date :
DI-1859 )
4477