a
a
d
d
a - a
d - d
c - c
Primer G
a
a
d
d
a - a
b - b
d - d
c - c
Primer G
BODY
4.
b
Using a brush or sponge, coat the edge of the glass and the
b
c
contact surface with Primer G as shown in the illustration.
c
HINT:
If the area other than that specified is coated by accident, wipe
b - b
off the primer with a clean shop rag before it dries.
NOTICE:
z
z
H11356
5.
b
b
Using a brush or sponge, coat the edge of the glass and the
c
c
contact surface with Primer G as shown in the illustration.
HINT:
If the area other than that specified is coated by accident, wipe
off the primer with a clean shop rag before it dries.
NOTICE:
z
z
H11357
-
BACK WINDOW GLASS
Fixed type:
COAT CONTACT SURFACE OF GLASS WITH PRIMER
G
Allow the primer coating for 3 minutes or more.
Throw away leftover Primer G.
Slide type, Power slide type:
COAT CONTACT SURFACE OF GLASS WITH PRIMER
G
Allow the primer coating for 3 minutes or more.
Throw away leftover Primer G.
Author :
BO-91
Date :
4862