Toyota Tundra 2005 Service - Repair - Maintenance page 2414

SPIDER GREASE FITTING ASSEMBLY DIRECTION
FOR 4WD REAR PROPELLER SHAFT
No. 1
PROPELLER SHAFT
No. 2, No. 3, No. 4 and No. 5
Sleeve Yoke
No. 2
− SPIDER BEARING
S
When replacing the rear propeller shaft spider on 4WD
vehicles, be sure that the grease fitting assembly holes
are facing in the direction shown in the illustration below.
No. 1
No. 4
No. 3
The figure on the left shows the locations
of the grease fittings from the rear.
No. 5
Sleeve Yoke
PR−21
F19336