Toyota Tundra 2005 Service - Repair - Maintenance page 2832

SUPPLEMENTAL RESTRAINT SYSTEM
H24333
Claws Clip
H24334
H24316
H24337
H24861
- SIDE AIRBAG ASSEMBLY (Manual Adjuster Type)
(b) Remove the 2 screws and vertical adjuster handle.
9. REMOVE SEAT CUSHION INNER SHIELD
(a) Remove the screw from the seat cushion inner shield.
(b) Using a screwdriver, remove the seat cushion inner
shield.
HINT:
Tape the screwdriver tip before use.
10. REMOVE FRONT SEAT INNER BELT
(a) Disconnect the wire harness clamps and connectors.
(b) Remove the nut and front seat inner belt.
11. REMOVE ARMREST ASSEMBLY
(a) Using a screwdriver, remove the armrest cap.
(b) Remove the bolt, armrest spacer, armrest lock plate and
armrest assembly.
(c) Remove the spacer from the armrest assembly.
12. REMOVE SEATBACK COVER AND PAD
(a) Remove the seatback cover lower part from the seat
frame assembly.
(b) Open the fastener.
(c) w/ Side airbag:
Remove the nut and disconnect the seatback cover
bracket from the seat frame assembly.
Author :
RS-65
Date :
4480