Toyota Tundra 2005 Service - Repair - Maintenance page 3034

LOCK UNLOCK
UNLOCK
LOCK
2 1
6 5
BODY ELECTRICAL
5.
(Door lock set to LOCK)
If the continuity is not as specified, replace the door lock assem-
I27633
bly.
6.
(Door lock set to LOCK)
If the continuity is not as specified, replace the door lock assem-
I27632
bly.
7.
2 1
(a)
(b)
If operation is not as specified, replace the door lock assembly.
I04138
8.
6 5
(a)
(b)
If operation is not as specified, replace the door lock assembly.
I04139
- POWER DOOR LOCK CONTROL SYSTEM (Double
Cab)
INSPECT REAR LEFT DOOR UNLOCK DETECTION
SWITCH CONTINUITY
Switch Position Tester Connection
OFF
ON
(Door lock set to
UNLOCK)
INSPECT REAR RIGHT DOOR UNLOCK DETECTION
SWITCH CONTINUITY
Switch Position Tester Connection
OFF
ON
(Door lock set to
UNLOCK)
INSPECT DRIVER SIDE DOOR LOCK MOTOR OPERA-
TION
Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, and check that
the door lock cable moves to the UNLOCK position.
Reverse the polarity and check that the door lock cable
moves to the LOCK position.
INSPECT PASSENGER SIDE DOOR LOCK MOTOR
OPERATION
Connect the positive (+) lead from the battery to terminal
5 and the negative (-) lead to terminal 6, and check that
the door lock cable moves to the UNLOCK position.
Reverse the polarity and check that the door lock cable
moves to the LOCK position.
Author :
Specified Condition
6 - 9 No continuity
6 - 9 Continuity
Specified Condition
6 - 9 No continuity
6 - 9 Continuity
Date :
BE-125
4682