BODY
-
FRONT WIPER AND WASHER
REMOVAL
1.
REMOVE WIPER ARMS
(a)
Using a screwdriver, remove the 2 caps.
HINT:
Tape the screwdriver tip before use.
(b)
Remove the 2 nuts and wiper arms.
2.
REMOVE COWL TOP VENTILATOR LOUVER
(a)
Using a clip remover, remove the 6 clips.
(b)
Remove the 8 screws and cowl top ventilator louver.
3.
REMOVE HOOD TO COWL TOP SEAL
Remove the hood to cowl top seal from the cowl top ventilator
louver.
4.
REMOVE WIPER MOTOR
(a)
Disconnect the connector.
(b)
Unfasten the 4 bolts.
(c)
Disconnect the wiper motor from the wiper link, then re-
move the wiper motor.
5.
REMOVE WIPER LINK
(a)
Remove the 6 bolts.
(b)
Remove the wiper link through the service hole.
H09481
6.
REMOVE WASHER NOZZLE
(a)
Disconnect the washer hose.
(b)
Using a screwdriver, remove the nozzle.
HINT:
Tape the screwdriver tip before use.
(c)
Perform the same procedure on the other side.
H16691
Author :
Date :
BO-47
BO0IB-05
4818