Toyota Tundra 2005 Service - Repair - Maintenance page 3132

BO-18
Cotton
Tape
1
1
5.
Install the front lower frame with the 2 bolts and nut.
6.
H09444
7.
Install the door glass with the 2 bolts.
NOTICE:
Do not damage the door glass.
8.
9.
(a)
H09446
(b)
10.
(a)
(b)
11.
(a)
Panel
HINT:
z
z
Cover
z
BO2455
(b)
12.
(a)
(b)
(c)
13.
2
Install the door assist grip to the door trim with the 2 screws..
14.
15.
2
H06127
BODY - FRONT DOOR
INSTALL FRONT LOWER FRAME
INSTALL DOOR GLASS RUN
INSTALL DOOR GLASS
Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)
INSTALL DOOR BELT MOULDING
INSTALL OUTSIDE REAR VIEW MIRROR
Install the outside rear view mirror with the 3 screws.
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
w/ Remote control:
Connect the connector.
INSTALL SPEAKER
Install the speaker with the 3 screws.
Connect the connector.
INSTALL SERVICE HOLE COVER
Install the service hole cover.
When installing the service hole cover, pull out the cables
and connectors through the service hole cover.
There should be no wrinkles or folds after attaching the
service hole cover.
After attaching the service hole cover, confirm the sealing
condition.
Connect the clamps and connector.
INSTALL INSIDE HANDLE
Connect the 2 cables to the inside handle.
Slide the inside handle forward to install it.
Install the screw.
INSTALL DOOR ASSIST GRIP
INSTALL LOWER WEATHERSTRIP
INSTALL INNER WEATHERSTRIP
Author : Date :
4789