Toyota Tundra 2005 Service - Repair - Maintenance page 2979

BE-70
Not Pushed
Pushed in
Pushed in
Not Pushed
BODY ELECTRICAL
INSPECTION
1. Double cab:
INSPECT STOP LIGHT SWITCH CONTINUITY
Switch Position
Not pushed
Not pushed
I21525
If the continuity is not as specified, replace the switch.
2. Except double cab:
INSPECT STOP LIGHT SWITCH CONTINUITY
1
2
Switch Position
Not pushed
Not pushed
3
4
If the continuity is not as specified, replace the switch.
I27048
3. INSPECT HI- MOUNTED STOP LIGHT ASSEMBLY
CONTINUITY
Using an ohmmeter, check that continuity exists between termi-
nals 1 and 2.
If the continuity is not as specified, replace the bulb or light.
I11921
- STOP LIGHT SYSTEM
Tester Connection
Pushed in
Pushed in
Tester Connection
Pushed in
Pushed in
Author :
Specified Condition
1 - 4 Continuity
1 - 4 No continuity
2 - 3 No continuity
2 - 3 Continuity
Specified Condition
1 - 2 Continuity
1 - 2 No continuity
3 - 4 No continuity
3 - 4 Continuity
Date :
BE2LU-02
4627