Toyota Tundra 2005 Service - Repair - Maintenance page 2804

SUPPLEMENTAL RESTRAINT SYSTEM
H23215
H23212
- FRONT PASSENGER AIRBAG ASSEMBLY
15. REMOVE LOWER INSTRUMENT COVER
(SEE PAGE BO-1
16. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Using a clip remover, disengage the connector clamp.
(b) Disconnect the airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Remove the bolt holding the front passenger airbag as-
sembly and instrument panel.
(d) Remove the 2 bolts holding the front passenger airbag
assembly and instrument panel reinforcement.
(e) Remove the front passenger airbag assembly.
CAUTION:
z
Do not store the front passenger airbag assembly
with the airbag deployment side facing downward.
z
Never disassemble the front passenger airbag as-
sembly.
Author :
11)
Date :
RS-37
4452