Toyota Tundra 2005 Service - Repair - Maintenance page 2735

Pressure Feed Tube
Pressure Feed Tube
Stopper
Suction Hose
STEERING - POWER STEERING VANE PUMP (1GR-FE)
INSTALLATION
1. INSTALL VANE PUMP ASSEMBLY
(a) Install the vane pump assembly with the 2 bolts.
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
F17910
(b) Connect the oil pressure switch connector.
NOTICE:
Be careful that the oil does not come into contact with the
connector.
F17909
2. CONNECT PRESSURE FEED TUBE
(a) Install a new gasket to the pressure feed tube.
(b) Install the pressure feed tube with the union bolt.
F17908
HINT:
Make sure that the stopper of the pressure feed tube contacts
the pump housing as shown in the illustration.
(c) Tighten the union bolt.
Torque: 46.5 N·m (474 kgf·cm, 34 ft·lbf)
F17903
3. CONNECT SUCTION HOSE
Connect the suction hose with the clip.
F17907
Author : Date :
SR-57
SR1KY-01
4383