Toyota Tundra 2005 Service - Repair - Maintenance page 2962

Right Turn
Left Turn
8 7 6 5 4
17 16 15 14 13 12
Wire Harness Side
Tester Connection
1 - Body ground
1 - Body ground
2 - Body ground
3 - Body ground
4 - Body ground
5 - Body ground
5 - Body ground
6 - Body ground
6 - Body ground
7 - Body ground
8 - Body ground
8 - Body ground
BODY ELECTRICAL
INSPECTION
1.
If the continuity is not as specified, replace the switch.
3 2 1
11 10 9
I12796
2.
Disconnect the connector from the turn signal flasher and in-
spect the connector on the wire harness side, as shown in the
table.
I04046
Ignition switch LOCK or ACC
Ignition switch ON
Constant
Constant
Constant
Turn signal switch RIGHT or OFF
Turn signal switch LEFT
Turn signal switch LEFT or OFF
Turn signal switch RIGHT
Constant
Hazard warning switch OFF
Hazard warning switch ON
If the result is as specified, replace the flasher.
- TURN SIGNAL AND HAZARD WARNING SYSTEM
INSPECT TURN SIGNAL SWITCH CONTINUITY
Switch Position
Left turn
Original
Right turn
INSPECT TURN SIGNAL FLASHER RELAY CIRCUIT
Condition
Author :
Tester Connection Specified Condition
1 - 2
1 -2, 2 - 3
2 - 3
Specified Condition
Below 1 V
10 - 14 V
Continuity
Continuity
10 - 14 V
No Continuity
Continuity
No Continuity
Continuity
Continuity
No Continuity
Continuity
Date :
BE-53
BE2K7-01
Continuity
No continuity
Continuity
4610