Toyota Tundra 2005 Service - Repair - Maintenance page 2951

BE-42
Driver Side J/B
1K
1J
1K
Tester Connection
1I-2 - Body ground
1I-2 - Body ground
1J-8 - Body ground
1K-2 - Body ground
1K-5 - Body ground
1M-5 - Body ground
1M-5 - Body ground
1M-6 - Body ground
BODY ELECTRICAL
If the continuity is not as specified, replace the switch.
6.
(a)
1I
1M
1J
Ignition switch LOCK or ACC
Ignition switch ON or START
Constant
Constant
Constant
Fog light ON
Fog light OFF
Constant
- HEADLIGHT AND TAILLIGHT SYSTEM
Except double cab (w/ Day time running light):
CHECK INTEGRATION RELAY (DRIVER SIDE J/B)
CIRCUIT
Disconnect the 1I, 1J, 1K, 1M and 1N driver side J/B con-
nectors, and check the voltage or continuity of each termi-
nal of the wire harness side connectors.
1N
Condition
Author :
1N
1I
1M
Specified Condition
No voltage
10 - 14 V
Continuity
10 - 14 V
10 - 14 V
10 - 14 V
Below 1 V
Continuity
Date :
I25448
4599