Toyota Tundra 2005 Service - Repair - Maintenance page 3153

: 12 Clips
: 2 Clips
BODY - ACCESS DOOR
DISASSEMBLY
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page
1. REMOVE DOOR INSIDE HANDLE BEZEL
(a) Remove the screw.
(b) Using a screwdriver, remove the door inside handle be-
zel.
HINT:
H09429
Tape the screwdriver tip before use.
2. REMOVE DOOR ARMREST
(a) Remove the screw.
(b) Using a screwdriver, remove the door armrest.
HINT:
Tape the screwdriver tip before use.
3. REMOVE ACCESS DOOR TRIM
(a) Release the quarter window lock.
(b) Insert a screwdriver between the door trim and door panel
to remove the door trim.
HINT:
Tape the screwdriver tip before use.
4. REMOVE DOOR ARMREST BASE
Remove the 2 screws and door armrest base.
5. REMOVE SPEAKER
(a) Disconnect the connector.
(b) Remove the 4 screws and speaker.
6. REMOVE DOOR INSIDE HANDLE
(a) Remove the screw and slide the inside handle forward.
H09430
(b) Disconnect the cable as shown in the illustration.
7. REMOVE SERVICE HOLE COVER
(a) Disconnect the connector.
(b) Remove the service hole cover.
HINT:
Bring out the cable and connector through the service hole cov-
er.
H09431
SS-2 ).
Author : Date :
BO-39
BO2EO-03
4810