Toyota Tundra 2005 Service - Repair - Maintenance page 2667

Hide thumbs Also See for Tundra 2005:

Table of Contents

DISPOSAL METHOD OF BRAKE BOOSTER ACCUMULA-

TOR ASSEMBLY

HYDRAULIC BRAKE BOOSTER (w/ VSC)

Place the brake booster accumulator assembly in a vise

and cover it with cloth.

Carefully cut a hole in area A of the brake accumulator as-

sembly shown in the illustration on the left using a saw

and discharge the gas remaining inside.

Cover with a piece of cloth when working because

gas and liquid may blow out.

Carefully, not abruptly, cut the assembly.

Wear protective glasses.

When the outer body of the brake booster accumulator

assembly is cut, gas and liquid discharge.

The gas is colorless, odorless and harmless nitrogen gas.

The liquid is brake fluid.