Toyota Tundra 2005 Service - Repair - Maintenance page 3227

: 4 Clips
: 3 Clips
2 Clips
7 Clips
BODY - INSTRUMENT PANEL
12. REMOVE LOWER FINISH PANEL
(a) Remove the 2 screws and hood lock release lever.
(b) Remove the 4 bolts and lower finish panel.
(c) Disconnect the connectors.
H11174
13. REMOVE SWITCH BASE
Using a screwdriver, lift up the switch base and remove it.
HINT:
Tape the screwdriver tip before use.
14. REMOVE NO. 2 HEATER TO REGISTER DUCT
15. REMOVE STEERING COLUMN
(See page
H11372
16. REMOVE CLUSTER FINISH PANEL
Remove the 2 screws and cluster finish panel.
17. REMOVE COMBINATION METER
(a) Remove the 4 screws.
(b) Remove the combination meter and disconnect the 4
connectors.
H11177
18. REMOVE INTEGRATION CONTROL PANEL
(a) Remove the 3 control knobs.
(b) Remove the 5 screws.
(c) Remove the integration control panel by pulling at the
positions indicated by the arrows in the illustration.
(d) Disconnect the connectors.
H21124
19. REMOVE RADIO TUNER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts and the radio tuner assembly.
20. REMOVE HEATER CONTROL ASSEMBLY
(See page
H21125
SR-18 , SR-33 )
AC-101 )
Author : Date :
BO-1 13
4884