2WD/4HI Switch
ON
4LO Switch
TRANSFER
INSPECTION
1.
(a)
(b)
(c)
HINT:
S
F19330
S
2.
(a)
(b)
(c)
(d)
(e)
ON
HINT:
S
S
F19331
−
TOUCH SELECT 2−4 AND HIGH−LOW SYSTEM
INSPECT 2WD
4HI SHIFT
Turn the ignition switch to the ON position.
Check that the 4HI indicator lights come on when the
2WD/4HI switch is in the ON position.
Check that the 4HI indicator lights go off when the
2WD/4HI switch is in the OFF position.
If the light does not come on, even though the switch has
been turned ON, the vehicle should be moved back and
forth.
If switching is not completed after 3 seconds of shift op-
eration, the 4HI indicator light will flash.
INSPECT 4HI
4LO SHIFT
Turn the ignition switch to the ON position.
Shift the transmission shift lever in the N position.
Turn the 2WD/4HI switch ON.
Check that the 4LO indicator lights come on and the 4HI
indicator lights go off when the 4LO switch is in the ON
position.
Check that the 4LO indicator lights go off and the 4HI indi-
cator lights come on when pushing the 4LO switch once.
Inspection should be performed with the vehicle stopped,
and transmission shift lever in the N position.
If switching is not completed after 3 seconds of shift op-
eration, the 4LO indicator light will flash.
TR−39
TR09T−05