Toyota Tundra 2005 Service - Repair - Maintenance page 2746

SR-68
STEERING - POWER STEERING VANE PUMP (2UZ-FE)
10. INSTALL SPRING, FLOW CONTROL VALVE AND
PRESSURE PORT UNION
(a) Install the spring on the front housing.
(b) Install the flow control valve in the correct direction
(See page SR-59
(c) Coat a new O-ring with power steering fluid and install it
on the pressure port union.
(d) Install the pressure port union.
Torque: 83 N·m (850 kgf·cm, 61 ft·lbf)
11. INSTALL SUCTION PORT UNION
(a) Coat a new O-ring with power steering fluid and install it
on the suction port union.
(b) Install the suction port union with the bolt.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
12. MEASURE PS VANE PUMP ROTATING TORQUE
(See page SR-62
Author :
).
)
Date :
4394