Toyota Tundra 2005 Service - Repair - Maintenance page 2592

BR−16
REMOVAL
1. REMOVE SCUFF PLATE LH, COWL SIDE TRIM LH, LOWER FINISH PANEL AND NO. 2 HEATER
TO REGISTER DUCT
2. REMOVE PARKING BRAKE PEDAL ASSEMBLY
(a) Disconnect the parking brake switch connector.
(b) Remove the lock nut and adjusting nut from the parking brake wire.
(c) Remove the clip and parking brake wire.
(d) Remove the 4 bolts and parking brake pedal assembly.
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
BRAKE − PARKING BRAKE PEDAL
BR10B−05