Toyota Tundra 2005 Service - Repair - Maintenance page 3204

BO-90
Adhesive
Primer M
Primer M
Adhesive
BODY - BACK WINDOW GLASS
INSTALLATION
1. Fix type, Slide type, Power slide type:
CLEAN AND SHAPE CONTACT SURFACE OF BODY
(a) Using a knife, cut away any rough adhesive on the con-
tact surface of the body to shape the surface.
HINT:
Leave as much of the adhesive on the body as possible.
(b) Clean the contact surface of the body with a piece of shop
rag saturated with cleaner.
BO4420
2. Fix type, Slide type, Power slide type:
POSITION GLASS
(a) Place the glass in the correct position.
(b) Check that the whole contact surface of the glass rim is
perfectly even.
(c) Place reference marks on the glass and body.
(d) Remove the glass.
H11354
3. Fix type, Slide type, Power slide type:
COAT CONTACT SURFACE OF BODY WITH PRIMER
M
Using a brush, coat the exposed part of the body with Primer
M.
NOTICE:
z
Allow the primer coating to dry for 3 minutes or more.
z
Do not apply too much Primer M.
z
Throw away any leftover Primer M.
H02865
Author : Date :
BO4Q6-01
4861