Toyota Tundra 2005 Service - Repair - Maintenance page 2570

Hide thumbs Also See for Tundra 2005:
Table of Contents

Advertisement

SA−156
Bushing Tabs
Bushing Tabs
SST
SUSPENSION AND AXLE
REPLACEMENT
1.
REPLACE BUSHINGS
(a)
Using a saw, cut the both bushing tabs as shown in the
illustration.
F07366
(b)
Using SST and a press, press out the both inner tubes
and rubber parts of the bushings.
SST
SST
F07367
(c)
Using a chisel and hammer, tap out the outer tubes.
F07368
(d)
Using SST and a press, install 2 new bushings.
SST
SST
F07369
2.
REPLACE LEAF SPRING
(a)
Bend to open the spring clips.
Using a chisel and hammer, pry up the 2 spring clips.
(b)
Remove the center bolt and nut.
Hold the spring near the spring center bolt in a vise and
remove the center bolt and nut.
F04022
REAR LEAF SPRING
09950−60010 (09951−00350)
09950−70010 (09951−07150)
09710−28012 (09710−07062),
09710−30041 (09710−03211)
SA0C4−04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tundra 2006

Table of Contents