SUSPENSION AND AXLE
(c)
Replace the spring clip.
(1)
(2)
(d)
Install the spring center bolt and nut.
(1)
(2)
Torque: 44 N·m (450 kgf·cm, 33 ft·lbf)
Z03060
(e)
Bend the spring clips.
Using a hammer, bend the spring clips into the position.
R04069
−
REAR LEAF SPRING
Drill off the head of the rivet and drive it out.
Install a new rivet into the holes of the leaf spring
and clip. Then rivet with a press.
Align the leaf spring holes and secure the leaves
with a vise.
Install the spring center bolt and nut.
SA−157