Toyota Tundra 2005 Service - Repair - Maintenance page 3283

BODY - FRONT SEAT (Bench Type)
10. REMOVE LH OUTER TRACK ASSEMBLY
Slide the LH outer track assembly until the torx® screws
(a)
on the rear side can be seen.
(b) Using a torx® socket wrench, remove the 2 torx® screws
from the LH outer track assembly rear side.
H24300
Slide the LH outer track assembly until the torx® screws
(c)
on the front side can be seen.
(d) Using a torx® socket wrench, remove the 2 torx® screws
from the LH outer track assembly front side, and remove
the LH outer track assembly.
11. REMOVE RH OUTER TRACK ASSEMBLY
HINT:
Perform the same procedure on the other side.
H24301
12. REMOVE SEAT TRACK HANDLE LH
(a) Disconnect the seat track control cable.
H24304
(b) Remove the spring.
H24302
(c) Remove the nut and seat track handle LH.
H24303
Author : Date :
BO-169
4940