Toyota Tundra 2005 Service - Repair - Maintenance page 2753

SST
STEERING - POWER STEERING GEAR
5. REMOVE RH AND LH RACK ENDS AND CLAW WASH-
ERS
(a) Using a screwdriver and hammer, unstake the washer.
NOTICE:
Avoid any impact on the steering rack.
F03699
(b) Using a spanner to hold the steering rack steadily, and us-
ing SST, remove the rack end.
SST
HINT:
Mark the RH and LH rack ends.
NOTICE:
Use SST 09922-10010 in the direction shown in the illustra-
tion.
(c) Remove the washer from the rack end.
F06749
(d) Perform the same procedure on the other side.
6. REMOVE RACK GUIDE SPRING CAP LOCK NUT
Using SST, remove the lock nut.
SST
NOTICE:
Use SST 09922-10010 in the direction shown in the illustra-
tion.
SST
7. REMOVE RACK GUIDE SPRING CAP, RACK GUIDE
SPRING AND RACK GUIDE
(a) Using a hexagon wrench, remove the rack guide spring
F06751
cap.
(b) Remove the rack guide spring and rack guide.
09922-10010
09922-10010
Author :
SR-75
Date :
4401