SA−24
SST
SST
SUSPENSION AND AXLE
REASSEMBLY
1.
INSTALL NEW BEARING
SST
(a)
Using SST and a press, install a new bearing to the steer-
ing knuckle.
SST
(b)
Using snap ring pliers, install a new snap ring.
SST
R13277
2.
INSTALL NEW OIL SEAL (OUTSIDE)
(a)
Using SST and a plastic hammer, install a new oil seal
(outside).
SST
SST
(b)
Coat MP grease to the oil seal lip.
3.
INSTALL AXLE HUB TO STEERING KNUCKLE
(a)
Install the dust cover to the steering knuckle with the 4
bolts.
SST
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
R13278
(b)
Using SST and a press, install the axle hub to the steering
knuckle.
SST
SST
4.
INSTALL ABS SPEED SENSOR ROTOR (w/ ABS)/
SPACER (w/o ABS)
NOTICE:
Do not scratch the serration of the speed sensor rotor.
R13279
5.
2WD:
INSTALL NEW LOCK NUT
(a)
Using SST, install and torque a new lock nut to the axle
hub.
SST
Torque: 274 N·m (2,800 kgf·cm, 203 ft·lbf)
(b)
Using a chisel and hammer, stake the lock nut.
R13215
6.
4WD:
INSTALL BEARING SPACER
Using SST and a press, install the bearing spacer.
SST
7.
2WD:
INSTALL GREASE CAP
R13418
−
FRONT AXLE HUB
09527−17011, 09950−60020 (09951−00910)
09223−15030, 09527−17011
09649−17010
09318−12010
09950−60010 (09951−00650),
09950−70010 (09951−07150)
SA1K1−02