Toyota Tundra 2005 Service - Repair - Maintenance page 3162

Hide thumbs Also See for Tundra 2005:

Table of Contents

2.0 to 2.5 mm

(0.079 to 0.098 in.)

0.7 to 0.75 mm

(0.028 to 0.0295 in.)

FRONT WIPER AND WASHER

INSPECT WASHER NOZZLE

While operating the washer, check whether the upper

point where the washer fluid hits the windshield and the

surge area are within the range indicated by the hatched

Check if the lower point where the washer fluid hits the

windshield is within the range of the wiping pattern (the

area of the glass which is wiped by the wiper blades).

ADJUST WASHER NOZZLE

Using a tool like the one shown in the illustration, change the

direction of the nozzle hole to adjust the point where washer

fluid hits the windshield.

Approx. 150 mm (5.90 in.)

Approx. 50 mm (1.97 in.)

Approx. 312.3 mm (12.295 in.)

Approx. 299.2 mm (11.780 in.)