Toyota Tundra 2005 Service - Repair - Maintenance page 2681

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSPECT DRIVE BELT

Visually check the belt for excessive wear, frayed cords,

If any defect is found, replace the drive belt.

Cracks on the rib side of a belt are considered acceptable. Re-

place the belt if there are any missing ribs.

After installing a belt, check that it fits properly in the

ribbed grooves.

Check with your hand to confirm that the belt has not

slipped out of the groove on the bottom of the pulley.