Toyota Tundra 2005 Service - Repair - Maintenance page 2457

Hide thumbs Also See for Tundra 2005:

Table of Contents

SUSPENSION AND AXLE

REMOVE OIL SEAL AND OIL SLINGER

Using SST, remove the oil seal.

Remove the oil slinger.

REMOVE REAR BEARING AND BEARING SPACER

Using SST, remove the rear bearing from the drive pinion.

Remove the bearing spacer.

REMOVE SIDE BEARING RETAINER

Remove the 10 bolts and tap out the retainer with a plastic ham-

REMOVE DIFFERENTIAL CASE ASSEMBLY

REMOVE DRIVE PINION FROM DIFFERENTIAL CAR-

REMOVE DRIVE PINION FRONT BEARING

Using SST and a press, remove the bearing and washer from

the drive pinion.

If the drive pinion or ring gear is damaged, replace them as a

REMOVE DRIVE PINION BEARING OUTER RACES

Using a brass bar and hammer, remove the front bearing

FRONT DIFFERENTIAL CARRIER