Toyota Tundra 2005 Service - Repair - Maintenance page 2838

SUPPLEMENTAL RESTRAINT SYSTEM
H24337
H24316
Clip
Claws
H24334
H24333
- SIDE AIRBAG ASSEMBLY (Manual Adjuster Type)
(f) Install the seatback cover belt to the seat frame assembly.
2. INSTALL ARMREST ASSEMBLY
(a) Install the spacer to the armrest assembly.
(b) Install the armrest assembly, armrest lock plate and arm-
rest spacer with the bolt.
Torque: 37 N·m (377 kgf·cm, 27 ft·lbf)
HINT:
Install the armrest lock plate as shown in the illustration.
(c) Install the armrest cap.
3. INSTALL FRONT SEAT INNER BELT
(a) Install the front seat inner belt with the nut.
Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)
(b) Connect the connectors and wire harness clamps.
4. INSTALL SEAT CUSHION INNER SHIELD
Install the seat cushion inner shield with the screw.
5. INSTALL VERTICAL ADJUSTER HANDLE
(a) Install the vertical adjuster handle with the 2 screws.
(b) Install the vertical adjuster handle cap.
6. INSTALL RECLINING ADJUSTER RELEASE HANDLE
Author :
RS-71
Date :
4486