Toyota Tundra 2005 Service - Repair - Maintenance page 3068

Hide thumbs Also See for Tundra 2005:

Table of Contents

BODY ELECTRICAL

WIRELESS DOOR LOCK CONTROL SYSTEM (Double

REMOVE TRANSMITTER BATTERY

Special caution should be taken for handling each compo-

nent as they are precision electronic components.

Using a screwdriver, open the transmitter case.

Do not forcibly pry out the cover.

Using a screwdriver, pry out the battery (lithium battery).

Do not push the terminals with your finger.

Prying up the batteries (lithium battery) to forcibly re-

move it will cause deformation of the terminals.

Do not touch the battery with wet hands. Water may

cause unexpected rust.

Do not touch or move any components inside the

transmitter as it may interfere with proper operation.

INSTALL TRANSMITTER BATTERY

Install a new battery (lithium battery) with the positive (+)

side up, as shown in the illustration.

Be sure that the positive side and the negative side of

the transmitter battery are matched-up correctly.

Be careful not to bend the electrode of the transmitter

battery insertion.

Be careful that dust or oil does not adhere to the trans-

mitter case.

Install the case securely.