Toyota Tundra 2005 Service - Repair - Maintenance page 2447

Hide thumbs Also See for Tundra 2005:

Table of Contents

SUSPENSION AND AXLE

Using pliers, compress the clamp and attach the claws.

INSTALL OTHER BOOT CLAMPS TO BOTH BOOTS

Secure the clamp onto the boot.

Place SST onto the clamp.

Tighten the SST so that the clamp is pinched.

Do not overtighten the SST.

Using SST, adjust the clearance of the clamp.

Clearance: 1.0 − 1.5 mm (0.039 − 0.059 in.)

CHECK DRIVE SHAFT (See page SA−31)

FRONT DRIVE SHAFT