Toyota Tundra 2005 Service - Repair - Maintenance page 3202

BO-88
Connector
BODY - BACK WINDOW GLASS
20. Power vertical type:
REMOVE BACK WINDOW GLASS
(a) Disconnect the defogger connector.
(b) Remove the 4 bolts and glass.
HINT:
Insert a shop rag inside the panel to prevent the back window
glass from being scratched.
NOTICE:
z
Do not damage the back window glass assembly.
z
When the bolts are removed, the back window glass
assembly might fall and become deformed.
H22885
21. Power vertical type:
REMOVE BACK WINDOW REGULATOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 7 bolts and regulator.
HINT:
Remove the back window regulator assembly through the ser-
vice hole.
NOTICE:
When the bolts are removed, the back window regulator as-
H22884
sembly may fall and become deformed.
22. Power vertical type:
REMOVE BACK WINDOW MOULDING
(a) Remove the 8 bolts and the bracket LH and RH.
H22883
(b) Remove the 2 clips.
(c) Using a drill of less than ø 4 mm (0.16 in.), drill out the 14
rivet heads and remove the moulding.
NOTICE:
z
Be sure to gently place the drill perpendicular to the
rivet, otherwise the rivet hole and the drill itself will be
damaged.
z
Be careful as the cut rivet will be very hot
z
Cover the panel with a shop rag to prevent metal de-
H22887
bris form entering inside the panel.
Author : Date :
4859