Toyota Tundra 2005 Service - Repair - Maintenance page 2785

RS-18
SUPPLEMENTAL RESTRAINT SYSTEM
23. DISCONNECTION OF CONNECTOR FOR FRONT AIRBAG SENSOR
(a) Push down the housing lock (white part) and slide the CPA (yellow part). (At this time, the connector
cannot be disconnected yet).
(b) Push down the housing lock (white part) again and disconnect the connector.
HINT:
Do not push down the A part shown in the illustration when disconnecting.
Connector
lock is
released
(c) After disconnecting the connector, check that the position of the housing lock (white part) is as shown
in the illustration.
- SRS AIRBAG
A
CPA (Yellow Part)
Author :
Housing Lock (White Part)
Date :
H24685
H24686
4433