Toyota Tundra 2005 Service - Repair - Maintenance page 3092

BE-192
Left Side
Up
Left
Off
Down
No Pin
1
2
5
3
w/ Mirror Heater
5
BODY ELECTRICAL
Right Side
Right
No Pin
I11900
3 5
2 1
N14863
w/o Mirror Heater
1
3
1
I24629
- POWER MIRROR CONTROL SYSTEM (Except Double
Cab)
INSPECTION
1. Left side:
INSPECT MIRROR SWITCH CONTINUITY
Switch Position
UP
DOWN
LEFT
RIGHT
If the continuity is not as specified, replace the switch.
2. Right side:
INSPECT MIRROR SWITCH CONTINUITY
Switch Position
UP
DOWN
LEFT
RIGHT
If the continuity is not as specified, replace the switch.
3. 2UZ-FE:
INSPECT ACC CUT RELAY CONTINUITY
Tester Connection
3 - 5
3 - 5
If the continuity is not as specified, replace the relay.
4. INSPECT MIRROR MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 (3) and the negative (-) lead to terminal 5 (1). Check that
the mirror turns to the left.
( ): w/o Mirror heater.
Author :
Tester Connection
4 - 8, 6 -7
4 - 7, 6 - 8
5 - 8, 6 - 7
5 - 7, 6 - 8
Tester Connection
3 - 8, 6 - 7
3 - 7, 6 - 8
5 - 8, 6 - 7
5 - 7, 6 - 8
Specified Condition
No continuity
Continuity
(When battery voltage is applied to terminals 1 and 2)
Date :
BE2KM-01
Specified Condition
Continuity
Continuity
Continuity
Continuity
Specified Condition
Continuity
Continuity
Continuity
Continuity
4749