Toyota Tundra 2005 Service - Repair - Maintenance page 3171

6 Clips
Adhesive Tape
Protector
7 Clips
Adhesive Tape
Protector
BODY -
REMOVAL
1. Resin bumper type:
REMOVE FRONT BUMPER EXTENSION
Remove the 4 nuts and front bumper extension.
NOTICE:
If the protector are damaged, exchange them for new pro-
tector.
2. w/ Front mudguard:
REMOVE FRONT MUDGUARD
Remove the 4 screws and front mudguard.
H20886
3. REMOVE FRONT FENDER OUTSIDE MOULDING
Protector
(a) Remove the 6 screws.
(b) Using a heat light, heat the moulding to 20 to 30°C (68 to
86°F).
NOTICE:
Do not heat the moulding excessively.
(c) Cut off the adhesive tape with a knife.
NOTICE:
Do not damage the body.
(d) Remove the moulding.
NOTICE:
If the clips are damaged, exchange them for new clips.
4. w/ Rear mudguard:
REMOVE REAR MUDGUARD
H20712
Remove the 4 screws and rear mudguard.
5. REMOVE QUARTER OUTSIDE MOULDING
Protector
(a) Remove the 6 screws.
(b) Using a heat light, heat the moulding to 20 to 30°C (68 to
86°F).
NOTICE:
Do not heat the moulding excessively.
(c) Cut off the adhesive tape with a knife.
NOTICE:
Do not damage the body.
(d) Remove the moulding.
NOTICE:
If the clips are damaged, exchange them for new clips.
H20711
WHEEL OPENING MOULDING
Author :
BO-57
BO4H3-03
Date :
4828