Toyota Tundra 2005 Service - Repair - Maintenance page 3314

BO-200
Hog Ring
Hog Ring
Claw
BODY - FRONT SEAT (Split Type: Passenger's Side)
(i) w/ Side airbag:
Connect the seatback cover bracket to the seatback
frame with the nut.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
H24396
(j) Install the hog rings to the seatback cover.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
(k) Install the 2 bushings.
(l) Install the center armrest assembly with the bolt.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
(m) Close the fastener.
H24356
(n) Install the hog rings to the seatback cover.
HINT:
When installing the hog rings, take as much care as possible to
prevent wrinkles.
H24355
(o) Install the hog rings to the seatback cover belt.
20. INSTALL SEAT CUSHION LOWER SHIELD
Install the seat cushion lower shield with the 2 screws.
H24354
21. INSTALL RH SEAT CUSHION SHIELD
Engage the claws and install the RH seat cushion shield.
22. INSTALL RECLINING ADJUSTER RELEASE HANDLE
23. INSTALL HEADRESTS
24. INSTALL SEAT LEG INNER COVER
Install the seat leg inner cover with the 3 screws.
H24352
Author : Date :
4971