Toyota Tundra 2005 Service - Repair - Maintenance page 2852

SUPPLEMENTAL RESTRAINT SYSTEM
H24677
H23221
- CURTAIN SHIELD AIRBAG ASSEMBLY
INSPECTION
1. VEHICLES NOT INVOLVED IN A COLLISION
(a) Perform a diagnostic system check (see page
(b) With the curtain shield airbag assembly installed on the
vehicle, perform a visual check. If there are any defects
as mentioned below, replace the front pillar garnish or roof
headlining assy with a new one:
Cuts, minute cracks or marked discoloration on the front
pillar garnish or roof headlining assy around the curtain
shield airbag assembly.
2. VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS
NOT DEPLOYED
(a) Perform a diagnostic system check (see page
(b) With the curtain shield airbag assembly removed from the
vehicle, perform a visual check. If there are any defects
as mentioned below, replace the curtain shield airbag as-
sembly with a new one:
z
Cuts, tears and cracks, or marked discoloration on
the curtain shield airbag assembly.
z
Cracks or other damage to the connector.
CAUTION:
For removal and installation of the curtain shield airbag as-
sembly, see page RS-1 11
correct procedure.
Author :
and RS-1 14. Be sure to follow the
Date :
RS-85
RS12O-01
DI-1871 ).
DI-1871 ).
4500