Toyota Tundra 2005 Service - Repair - Maintenance page 2634

BR−58
BRAKE − LOAD SENSING PROPORTIONING AND BY−PASS
VALVE (LSP & BV)
DISASSEMBLY
1. REMOVE VALVE BRACKET
(a) Remove the nut, washer, bolt and 2 plate washers.
(b) Remove the 2 nuts, 2 washers, set plate and valve brack-
et from the valve body.
R13574
2. DISCONNECT SPRING FROM VALVE
Using pliers, remove the clip, and remove the spring from the
valve.
R13575
3. REMOVE SHACKLES NO. 1 AND NO. 2
(a) Remove the nut washer and bolt, and remove the load
sensing spring and 2 plate washers.
(b) Loosen the 2 nuts and plate washer plate, and remove
shackle No. 1 from shackle No. 2.
R13576
4. DISASSEMBLE LOAD SENSING SPRING
(a) Remove the 4 bushings and 2 collars.
(b) Remove the load sensing valve boot and load sensing
spring boot.
F08892
BR10S−03