Toyota Tundra 2005 Service - Repair - Maintenance page 3136

BO-22
Clip
8 Clips
BODY - FRONT DOOR (Double Cab)
DISASSEMBLY
HINT:
A bolt without a torque specification is shown in the standard
bolt chart (see page
1. REMOVE DOOR INSIDE BEZEL
(a) Using a screwdriver, open the cover.
HINT:
Tape the screwdriver tip before use.
(b) Remove the screw.
(c) Using a screwdriver, remove the door inside bezel, as
shown in the illustration.
HINT:
Tape the screwdriver tip before use.
2. REMOVE COURTESY LIGHT
H04751
3. REMOVE FRONT ARMREST BASE PANEL UPPER
WITH POWER WINDOW SWITCH
(a) Using a screwdriver, remove the front armrest base panel
upper together with the power window switch.
HINT:
Tape the screwdriver tip before use.
(b) Disconnect the connector.
(c) Remove the power window switch from the front armrest
base panel upper.
H16641
4. REMOVE FRONT DOOR LOWER FRAME BRACKET
GARNISH
Using a screwdriver, remove the front door lower frame bracket
garnish.
HINT:
Tape the screwdriver tip before use.
5. REMOVE FRONT DOOR TRIM PANEL
(a) Using a screwdriver, remove the 2 caps.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 screws and 2 clips.
(c) Insert a screwdriver between the front door trim panel and
front door panel to remove the front door trim panel.
HINT:
Tape the screwdriver tip before use.
H16642
SS-2 ).
Author : Date :
BO4PR-02
4793