Toyota Tundra 2005 Service - Repair - Maintenance page 3130

Hide thumbs Also See for Tundra 2005:

Table of Contents

w/ Power Door Lock

w/o Power Door Lock

INSTALL OUTSIDE HANDLE WITH DOOR LOCK CYL-

Install the door lock cylinder to the outside handle.

Install the outside handle with door lock cylinder with the

Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)

INSTALL DOOR LOCK

Apply MP grease to the sliding and rotating parts of the door

Using a torx® socket wrench, install the door lock with the

3 torx® screws.

Torx® socket wrench:

T30 (Part No. 09042-00010 or locally manufactured

Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)

Apply adhesive to the 3 screws.

Adhesive: Part No. 08833-00070, THREE BOND 1324

or equivalent

w/ Power door lock:

Connect the connector and install the bolt.

Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)

Connect the 2 links to the outside handle and door lock