Toyota Tundra 2005 Service - Repair - Maintenance page 2441

SUSPENSION AND AXLE
SST
Nut
Washer
− FRONT WHEEL HUB BOLT
FRONT WHEEL HUB BOLT
REPLACEMENT
1. REMOVE FRONT WHEEL
2. REMOVE BRAKE CALIPER AND DISC
(a) Remove the bolt and brake line clamp from the steering
knuckle.
(b) Remove the 2 bolts, brake caliper and disc.
(c) Support the brake caliper securely.
F07264
3. REMOVE HUB BOLT
Using SST and a screwdriver or an equivalent, remove the hub
bolt.
SST
R13372
4. INSTALL HUB BOLT
(a) Install a washer and nut to a new hub bolt as shown in the
illustration.
(b) Using a screwdriver or an equivalent to hold, install the
hub bolt by torquing the nut.
(c) Remove the nut and washer.
5. INSTALL BRAKE DISC AND CALIPER
(a) Install the brake disc, caliper and 2 bolts.
Torque: 123 N·m (1,250 kgf·cm, 90 ft·lbf)
R13373
(b) Install the brake line clamp to the steering knuckle with the
bolt.
Torque: 28 N·m (285 kgf·cm, 21 ft·lbf)
6. INSTALL FRONT WHEEL
Torque: 110 N·m (1,150 kgf·cm, 83 ft·lbf)
7. DEPRESS BRAKE PEDAL SEVERAL TIMES
09650−17011
SA−27
SA1K2−02