BE-54
10
1
BODY ELECTRICAL
3.
(a)
(b)
(c)
If the continuity is not as specified, replace the panel.
16
I27501
4.
(a)
(b)
(c)
If the continuity is not as specified, replace the panel.
17
I27432
-
TURN SIGNAL AND HAZARD WARNING SYSTEM
Double cab:
INSPECT HAZARD WARNING SWITCH CONTINUITY
Remove the integration control panel.
Check that the continuity exists between terminal 16 and
terminal 10 with the switch ON.
Check that no continuity exists between terminal 16 and
terminal 10 with the switch OFF.
Except double cab:
INSPECT HAZARD WARNING SWITCH CONTINUITY
Remove the integration control panel.
Check that the continuity exists between terminal 17 and
terminal 1 with the switch ON.
Check that no continuity exists between terminal 17 and
terminal 1 with the switch OFF.
Author :
Date :
4611