Toyota Tundra 2005 Service - Repair - Maintenance page 3242

BO-128
4 Clips
Clip
3 Clips
5 Clips
BODY - ROOF HEADLINING
12. REMOVE ROOM LIGHT
(a) Using a screwdriver, remove the room light cover.
(b) Remove the 2 screws and room light, then disconnect the
connector.
H11151
13. Standard cab:
REMOVE COAT HOOK
(a) Using a screwdriver, open the cap.
(b) Remove the screw and coat hook.
14. Standard cab:
REMOVE ROOM PARTITION GARNISHES
(a) Using a screwdriver, remove the back panel trim covers.
HINT:
Tape the screwdriver tip before use.
H11152
(b) Using a screwdriver, remove the room partition garnishes.
HINT:
Tape the screwdriver tip before use.
15. REMOVE QUARTER TRIM
(a) Standard cab:
Remove the bolt and front seat outer belt floor anchor.
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
(b) Access cab:
Remove the bolt and rear seat outer belt floor anchor.
H24389
Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)
H24390
H24391
Author : Date :
4899