STEERING
-
POWER STEERING VANE PUMP (2UZ-FE)
REMOVAL
1.
REMOVE AIR CLEANER ASSEMBLY WITH AIR
CLEANER HOSE
(a)
Disconnect the MAF meter connector.
(b)
Disconnect the hoses.
(c)
Remove the clamp.
(d)
Remove the 3 bolts and air cleaner assembly with air
cleaner hose connected.
2.
REMOVE DRIVE BELT
Loosen the drive belt tension by turning the drive belt tensioner
counterclockwise, and remove the drive belt.
3.
DISCONNECT 2 VACUUM HOSES
Remove the 2 clips and disconnect the 2 vacuum hoses.
4.
DISCONNECT RETURN HOSE
Remove the clip and disconnect the return hose.
5.
DISCONNECT PRESSURE FEED TUBE
Remove the union bolt and gasket, disconnect the pressure
EM6656
feed tube.
6.
REMOVE PS VANE PUMP ASSEMBLY
Remove the 2 bolts, nut, stud bolt and PS vane pump assembly.
Author :
Date :
SR-61
SR0ME-08
4387